Home  /  Floors

Commercial and healthcare flooring systems

A hospital floor is chosen twice: once for the ward, once for everything that crosses it — beds, trolleys, cleaning machines, and a contractor who must lay it without closing the corridor. These are the eight lines we manufacture, with the data we can publish.

Class T wear · R9 slip · B1 fire EU 249 hazardous-substance screening No waxing, low maintenance

Eight lines, and the one most projects start with

Most healthcare specifications land on the homogeneous PVC sheet: it holds wear, slip and fire together and welds into a continuous surface. The other seven exist because not every room is a ward.

Healthcare · high traffic

Homogeneous PVC vinyl flooring

Through-coloured sheet: Class T wear, R9 slip, B1 fire, no waxing. The default for wards and corridors.

View the line →
Cleanroom · pharmaceutical

PVC cleanroom flooring

For controlled areas where the floor is part of the pressure regime, not just the finish.

Datasheet on request →
Commercial · dry areas

Purified-carbon SPC flooring

Rigid-core carbon-additive plank for retail, office and hospitality floors where a sheet is not wanted.

Datasheet on request →
Clinical · sports

Rubber flooring

Resilient and quiet underfoot, for physiotherapy, rehabilitation and fitness rooms.

Datasheet on request →
Transport · heavy traffic

Flexible rubber-plastic flooring (RVT)

Homogeneous resilient sheet with a rubber-like feel and a PVC-type installation sequence.

Datasheet on request →
Education · material-origin briefs

Linoleum flooring

Natural raw materials, for projects carrying a material-origin requirement into the finishes package.

Datasheet on request →
Indoor courts · halls

Sports flooring

Point-elastic and area-elastic systems for school halls and club courts.

Datasheet on request →
Terrace · landscape

Outdoor WPC decking

Wood-plastic composite boards for external circulation and roof terraces.

Datasheet on request →

Published data

These are the figures we can put a standard against today. The other lines are specified from their own datasheets, released on request rather than guessed at on a web page.

ProductParameterResultTest standard
Homogeneous PVC vinyl sheetWear resistanceClass TReport on request
Homogeneous PVC vinyl sheetSlip resistanceR9Report on request
Homogeneous PVC vinyl sheetFire classificationB1Report on request
Homogeneous PVC vinyl sheetHazardous-substance screeningEU 249 passedEU 249
Homogeneous PVC vinyl sheetHeavy metalsFree of 19EU 249 screening
Homogeneous PVC vinyl sheetPhthalate plasticisersFree of 60EU 249 screening
Homogeneous PVC vinyl sheetMaintenanceNo waxingManufacturer specification
How to read this table: these four results are quoted from the test file. Every other line is sent as a datasheet with its own report attached — nothing here is a number we cannot document.

Where each line is specified

  • Wards, bed bays, corridors, nursing stations — homogeneous PVC vinyl, welded into a continuous surface
  • Operating theatres, cleanrooms, compounding — PVC cleanroom flooring
  • Imaging, laboratories, pharmacies — homogeneous or cleanroom sheet, depending on the cleaning regime
  • Physiotherapy, rehabilitation, fitness rooms — rubber
  • School halls, club courts — sports flooring
  • Retail, office, hotel public areas — SPC, RVT, linoleum
  • Roof terraces, external circulation — WPC decking

How the floor meets the wall and the ceiling

The junction is where flooring contracts usually fail: a skirting that does not meet the wall panel, a floor finish that lifts under the wall base, a ceiling grid that misses the wall head. Because we supply all three surfaces, one party owns those details — the flooring schedule comes out of the same drawing set as the medical clean wall panel and the ceiling grid.

On a phased refurbishment that matters: the floor follows the same room-by-room sequence as the walls, so a ward is handed back once, not three times.

FAQ

Which flooring do you recommend for a hospital ward?

Homogeneous PVC vinyl in almost every case: Class T wear, R9 slip and B1 fire, welded so the floor has no joint for soil to sit in. If the ward has a specific chemical or static requirement, send the clause and we answer against it.

Can I have samples and datasheets before specifying?

Yes. Tell us the line, the colour direction and the room type, and we send samples with cut sections plus the datasheet for that line, so your team sees the build-up rather than a face sample.

What is the MOQ and the lead time?

Quoted per project, because both depend on the mix of lines and the area per surface. Send the room schedule and the areas, and they are confirmed in writing with the quotation.

Which line fits the room?

Send the room schedule and the floor area; we return the datasheet and the welding detail for the sheet lines.

Request the specification pack